Home / All / Process Presentation / What Happens During a First Mold Trial for an LSR-Overmolded Automotive Connector Terminal?

What Happens During a First Mold Trial for an LSR-Overmolded Automotive Connector Terminal?

Nov 18,2026

Answer Excerpt

A first mold trial for an LSR-overmolded automotive connector terminal checks whether the tooling can produce the specified silicone geometry around the metal insert while keeping required metal areas exposed. It also provides initial samples for dimensional, visual and functional review against agreed project requirements.

Introduction

An automotive connector terminal overmolding project should not move directly from a drawing to mass production. The first mold trial is an important step for evaluating the tooling concept and the molded sample.

For metal terminals, the review must consider both the silicone section and the metal features that remain functional.

Explore our automotive connector LSR overmolding components for related custom applications.

What Happens Before the First Mold Trial?

The process starts with project information and engineering review.

1. Review the product requirements

The buyer provides a 2D drawing, 3D CAD file, physical sample or product photos. The engineering team reviews the metal material, surface condition, required silicone coverage, exposed metal areas, dimensional tolerances and application requirements.

2. Complete the DFM and tooling review

The mold concept should consider insert positioning, mold shut-off, silicone flow, bonding or mechanical retention, parting-line location and demolding direction.

This stage helps identify potential manufacturing issues before tooling begins. Learn more about our silicone mold design and tooling.

3. Manufacture and prepare the mold

After the design is reviewed, the mold is manufactured, assembled and debugged before the trial. The tooling arrangement depends on the actual component geometry and production requirements.
Workflow from engineering review and mold preparation to LSR overmolding trial

What Should Be Checked on the First Molded Samples?

The first samples should be compared with the approved drawing and agreed inspection criteria.
Inspection item
What to review
Silicone coverage
Correct molded area and boundary
Exposed metal
Required contact and functional areas remain clear
Insert position
Terminal location, angle and alignment
Surface quality
Visible flash, incomplete filling or damage
Dimensions
Critical dimensions match drawing requirements
Bonding and retention
Performance meets the specified project requirements
For custom LSR overmolded metal pin components, these checks help evaluate the combined metal-and-silicone structure.

Electrical, waterproof or environmental testing should be included only when specified by the customer's product requirements and validation plan.
Inspection of silicone coverage and exposed metal areas on an LSR overmolded terminal

What Happens After the First Trial?

The trial results are reviewed against the mold requirements and product specifications. Findings may include dimensional differences, silicone coverage issues, insert positioning, flash or demolding concerns.

If adjustments are needed, the mold design or process can be reviewed and another trial arranged.

A mold trial report can document mold performance and product quality evaluation. Sample review should establish whether the agreed requirements have been met before the project proceeds toward production.
Engineering review of mold tooling and first samples for automotive connector LSR overmolding

What Should Buyers Prepare for a Mold Trial Project?

To support an efficient project review, buyers should provide:

2D engineering drawing and 3D CAD file
Metal insert material and surface-finish details
Required silicone coverage and exposed metal areas
Silicone hardness and color requirements
Critical dimensions and tolerances
Mating component or assembly information
Required inspection and testing criteria
Estimated production quantity

These details help the manufacturer plan liquid silicone injection molding around the actual product requirements.

Conclusion and CTA

A successful first mold trial is more than producing a silicone-covered metal terminal. The sample must reflect the approved design, preserve functional metal areas and meet the agreed inspection requirements.

SiliconePlus supports custom automotive connector silicone components through engineering review, mold development, sampling and manufacturing.

If you are developing a metal terminal with an LSR-overmolded section, send us your drawing, 3D CAD file or physical sample for evaluation.

Contact SiliconePlus to discuss your project.

FAQ

Does the first mold trial guarantee mass-production approval?
No. It evaluates the initial tooling and molded samples. Further adjustments or validation may be required before production release.
Can I start a project with only a physical sample?
Yes. A physical sample can be used for initial project evaluation, although engineering drawings and 3D files are preferred.
What is checked during an LSR overmolding trial?
Typical checks include silicone coverage, exposed metal areas, insert position, flash, dimensions, demolding condition and project-specific functional requirements.

Are you looking for a reliable manufacturer of silicone products?

We can quickly provide customers with market analysis, technical support and customized services.